LIGHTFOX VISION SERIES 45INCH COMBO BEAM CREE LED WORK LIGHT BAR

Description :

The purpose of Vision Series design is to enhance the visibility of target objects at the range of 50 meters at a wider angle. It allows the light bars to throw huge amount of lighting power to this paticular area.
According to traffic research 2017, 27% of accidents at night are caused by animal / pedestrain crossing, and for over half of which, the braking mark shows that driver only started to brake after the animal/pedestrain is already on the road as drivers do not have clear visibility off the road on the sides.
This design allows driver to see the coming threat over 50 meters away and when it's still 10 meters away from the street, which gives drivers more than enough time and distance to respond and avoid potential danger.
Also, it is perfect for driver at the speed of 60-90KM/H to monitor forward road conditions to avoid bumps, pits and obstacles and allows them to react in time.

RULE-BREAKING FLOOD LED DESIGN - Instead of putting flood reflectors only on the sides of the light bar, we redesigned the distribution structure and flood LEDs are now spreaded evenly through the whole bar which solves the ultimate problem once and for good - Further or Wider. You can have both just out of one bar and in this way, and the lighting power is also well-distributed from the very center to side edge.
MID-RANGE FLOOD BEAM - 30-50 meter is a standard emergency braking distance for most vehicles, this particular beam pattern ensures that objects at about 50m are clearly visible and drivers have super-wide viewing eyesight to observe potential dangers such as wallows, stones and therefore, ensure driving safety. It lights up your entire forward viewing area as at sunny noon.
TOUGHENED OPTIC LENS - Plexiglass strengthened lens surface, protect components from direct damage and scratch-proof. Higher light transmission rate than PMMA lens and further reduce optical loss.
SIMPLE DIY INSTALLTION - Universal Mounting Brackets are included, easy setup to any mounting holes and openings with standard base mounts
FLEXIBLE TO ADJUST ANGLE - Suggested adjustment angle of the bracket: -5° to -11° (Corresponding to different models and different mounting positions), by this way, wind noise will be minimized, and the pecfect designed beam pattern will been presented while not causing any potential threat to other drivers.