FREE SHIPPING

ON ORDER OVER $5000

15 Frankston-Dandenong Road

Dandenong 3175

(03) 9769 1967

M-F : 9:00 - 5:00

  • Your shopping cart is empty!

EFS 25MM LIFT KIT FITS VOLKSWAGEN AMAROK ALL MODELS

  • $1,988.75

Product Details

  • Brand: EFS
  • Product Code: VA-100E-01E
  • Availability: In Stock

Description:


Fitting:


  • We have a fully qualified fitting and service center with qualified mechanics and Auto electricians.
  • Fitting charges for EFS KITS - $200


KIT CONTENTS:


  • 2 X 38-5649 SHOCKS
  • 2 X 36-5430 SHOCKS
  • 2 X EFS FRONT COIL SPRINGS
  • 2 X EFS REAR LEAF SPRINGS
  • 4 X EFS C453-1 UBOLTS
  • 1 X UK865 EFS BUSH KIT


EFS Elite Shock Absorbers


The EFS Elite Shock Absorber Range is developed for the 4wd owner who only pursues the best for their 4wd. EFS is built with high quality Internal & external components combined together to give you excellent performance and longevity. EFS shock absorbers are vehicle & height specific with valving developed to suit each vehicle. "Not a one shock suits all approach"


  • 51mm - 60mm External Tube - Greater oil capacity to keep the valve at a lower operating temperature
  • Low Pressure Nitrogen Gas - Prevent the oil from cavitating (foaming)
  • Long Travel Design - Maximises wheel articulation
  • 35mm Piston, Twin Tube Construction - Increased control of the spring during rebound and compression cycles
  • 16mm Quality Hardened Chromed Piston Rod Longer service life, and greater lateral strength
  • 1.5mm Outer & Inner Wall Thickness Greater durability and strength
  • Dynamic Motion Control Valve - Adjusts to different road & off road conditions
  • Polyurethane and rubber bushes – HI quality elastomer and rubber mounting bushes to suit specific applications


EFS shock absorbers are vehicle & height specific with valving codes developed to suit each vehicle. "Not a one shock suits all approach" .

3 year / 100,000 km warranty


Coil Springs


All EFS Coil Springs are:


  • Shot Peened - To stress relieve the outer surface of the Coil, so the Coil can operate under higher fatigue & repeated load conditions to ensure longevity.
  • Scragged for Quality Control -This is a process where the Coil is compressed beyond its yield point; this compression will set-up residual stresses and increase the elastic limit of the spring.
  • Powder Coated - To resist corrosion & to protect the spring steel from minor damage.


EFS Coil Springs are manufactured under a strict quality control system with the use of quality Spring steel in accordance with ISO-9002.

This ensures you are purchasing a high quality product that is backed by a 3 year/100,000km warranty.

EFS Coil Springs are produced in a variety of raised heights, From standard to 125mm & also a variety of spring rates to suit different applications - Towing, Load bearing accessories, Increased ride height & Competition.


Leaf Springs


Elite Leaf Springs


"Transform your rigid leaf sprung vehicle into a comfortable off-road performer with the EFS Elite comfort springs range"!!!

EFS Multi-Leaf Springs are made from high quality Japanese grade SUP9 & SUP9A Alloyed Carbon spring steel.
Designed as a comfort Leaf Spring that incorporates special features , to give the driver a comfortable ride on road & increased control off road with increased articulation & clearance. Available in 30mm to 80mm raised heights with a slight increase in spring rates over the original equipment.


  • Tapered Leaf Ends - To reduce the inter-leaf friction & to improve pressure distribution in the load bearing area.
  • Bolt Clip Liners - To reduce noise & friction.
  • Inter-Leaf Graphite Coating - For further reduction of friction.
  • Shot Peened & Scragged Tested - To reduce stress & ensure longevity.
  • Leaf Inserts Pads - For further reduction of friction.
  • Bolt Clips & Military Wraps - To prevent leaf spread & provide safety
  • Warranty - 3 year / 100,000 Km Warranty


Enforcer Leaf Springs


EFS Multi-Leaf Springs are made from high quality Japanese grade SUP9 & SUP9A Alloyed Carbon spring steel.
Designed as a Heavy Duty load carrying Spring with many load carrying capacity options.

To suit -


  • Mining Applications
  • Spear/radius cut endsHeavy laden touring vehicles
  • GVM upgrades
  • Inter-Leaf Graphite Coating - for further reduction of friction.
  • Shot Peened & Scragged Tested - to reduce stress & ensure longevity.
  • Bolt Clips & Military Wraps - to prevent leaf spread & provide safety
  • Warranty - 3 year / 100,000 Km Warranty


U-Bolts


  • Powder coasted for protection against corrosion & made from quality carbon steels with rolled threads to increase strength, due to a uniform grain finish.
  • Deep nuts are supplied for safety & strength with flat washers to provide a smooth contact surface area to reduce plate friction.
  • EFS have a vast variety of U-bolts on offer for most Makes and Models of 4wd's. We also can custom bend U-Bolts to order.


Polyurethane Bushes


  • EFS Polyurethane Bushes are made from high quality elastomers which gives the EFS Polyurethane Bush a high isolating strength & durable 
  • EFS poly bushes have an elastomer rating of 80 Duro to give improved suppleness & grease channels for increased distribution of lubrication.properties.
EFS SPECIFICATIONS
FRONT COMFORT
FRONT - P/NUM & LOAD VW-100E UP TO 60KG
LIFT 25MM
REAR HD
REAR - P/NUM & LOAD VW-01E 250KG
© 2015 MCC Dandenong Pty Ltd
  • Paypal