Leaf Springs
Elite Leaf Springs
"Transform your rigid leaf sprung vehicle into a comfortable off-road performer with the EFS Elite comfort springs range"!!!
EFS Multi-Leaf Springs are made from high quality Japanese grade SUP9 & SUP9A Alloyed Carbon spring steel.
Designed
as a comfort Leaf Spring that incorporates special features , to give
the driver a comfortable ride on road & increased control off road
with increased articulation & clearance. Available in 30mm to 80mm
raised heights with a slight increase in spring rates over the original
equipment.
- Tapered Leaf Ends - To reduce the inter-leaf friction & to improve pressure distribution in the load bearing area.
- Bolt Clip Liners - To reduce noise & friction.
- Inter-Leaf Graphite Coating - For further reduction of friction.
- Shot Peened & Scragged Tested - To reduce stress & ensure longevity.
- Leaf Inserts Pads - For further reduction of friction.
- Bolt Clips & Military Wraps - To prevent leaf spread & provide safety
- Warranty - 3 year / 100,000 Km Warranty
Enforcer Leaf Springs
EFS Multi-Leaf Springs are made from high quality Japanese grade SUP9 & SUP9A Alloyed Carbon spring steel.
Designed as a Heavy Duty load carrying Spring with many load carrying capacity options.
To suit -
- Mining Applications
- Spear/radius cut endsHeavy laden touring vehicles
- GVM upgrades
- Inter-Leaf Graphite Coating - for further reduction of friction.
- Shot Peened & Scragged Tested - to reduce stress & ensure longevity.
- Bolt Clips & Military Wraps - to prevent leaf spread & provide safety
- Warranty - 3 year / 100,000 Km Warranty
U-Bolts
- Powder
coasted for protection against corrosion & made from quality carbon
steels with rolled threads to increase strength, due to a uniform grain
finish.
- Deep nuts are supplied for safety & strength with
flat washers to provide a smooth contact surface area to reduce plate
friction.
- EFS have a vast variety of U-bolts on offer for most Makes and Models of 4wd's. We also can custom bend U-Bolts to order.
Coil Springs
All EFS Coil Springs are:
- Shot
Peened - To stress relieve the outer surface of the Coil, so the Coil
can operate under higher fatigue & repeated load conditions to
ensure longevity.
- Scragged for Quality Control -This is a
process where the Coil is compressed beyond its yield point; this
compression will set-up residual stresses and increase the elastic limit
of the spring.
- Powder Coated - To resist corrosion & to protect the spring steel from minor damage.
- EFS
Coil Springs are manufactured under a strict quality control system
with the use of quality Spring steel in accordance with ISO-9002.
- This ensures you are purchasing a high quality product that is backed by a 3 year/100,000km warranty.
- EFS
Coil Springs are produced in a variety of raised heights, From standard
to 125mm & also a variety of spring rates to suit different
applications - Towing, Load bearing accessories, Increased ride height
& Competition.
Polyurethane Bushes
- EFS
Polyurethane Bushes are made from high quality elastomers which gives
the EFS Polyurethane Bush a high isolating strength & durable
- EFS
poly bushes have an elastomer rating of 80 Duro to give improved
suppleness & grease channels for increased distribution of
lubrication.properties.
