Description:
Recharge your battery to original capacity
7 Amp battery charger BatteryCharge7.5 has ten charge states, including pulse and trickle charge modes. BatteryCharge7.5 is adjustable to 3.75, 5 or 7.5 Amps. It delivers high-performance intelligent charging. Use it with all types of 12 and 24 Volt Lead Acid batteries, such as AGM, Gel, Calcium, or Wet, as well as with LiFePO4 Lithium batteries:
- 12 V: with a capacity of 18 – 240 Ah
- 24 V: with a capacity of 10 – 120 Ah
- Lithium (12.8V LiFePO4): with a capacity of 10 – 80 Ah
Ten-phase-charging strategy enables the recharging of the battery to almost 100 % of its original capacity. The ten phases are: check, recovery, soft start, bulk (stages 4 to 7), absorbtion, maintenance 1 and maintenance 2. You can leave the battery permanently connected to the charger without damage or adverse effect on its performance.
Use BatteryCharge7.5 to
service your car, caravan, bike, truck, boat or as a spare charger. The
smart battery charger has protective circuits to prevent it from
sparking and overheating. It also features a large LCD display with
indicators to let you know the charge progress of your battery.
Moreover, it comes supplied both with large clamps and ring terminals to
connect to your battery. Finally, you can even use it to regenerate
completely discharged batteries.
KEY FEATURES
- Multi-stage charger with adjustable output
- Ability to charge multiple battery chemistries
- LCD display shows charge progress
- Overload and reverse connection protection
- Capable of charging battery sizes 10-240Ah
- Durable, dust- and water-proof casing
- Large clamps for easy battery connection
- Ring terminals to mount the charger on the battery
| BMPRO SPECIFICATIONS | |
| Battery Chemistry | AGM, Gel, Calcium or Wet, LiFePO4 |
| Battery Size | 10-240 Ah |
| Battery Type | Lead Acid, LiFePO4 |
| Charger Type | Ten-stage – micro digital processor |
| Input | 240V, 50Hz |
| Output | 3.75/5.0/7.5 Amps |
| Power Supply Mode | 12V |