MCC FALCON BAR STAINLESS TRIPLE LOOP PLUS SINGLE LOOP SUIT NISSAN PATHFINDER R51 (GROOVE BUMPER) (07/2005-05/2010)
707-01 WITH OPTION OF STAINLESS STEEL SINGLE LOOP, BLACK STEEL SINGLE LOOP, WITH OR WITH OUT FOG LIGHTS
- A : ADR & WINCH COMPATIBLE AND RATED FOR A 12,000lb LOW MOUNT WINCH. (SUBJECT TO WINCH DESIGN).
- B : FOR TYPE 707-01:
1.5MM THICK STAINLESS TUBE WITH 76MM CENTRE TUBE DIAMETRE, 51MM
SHOULDER TUBES DIAMETRE WITH TWO AERIAL MOUNTS. MADE OF 304 STRUCTURAL
GRADE STAINLESS STEEL WHICH RETAIN A HIGHER LEVEL OF DUCTILITY (THE
ABILITY TO ABSORB ENERGY AND DEFORM WITH OUT BREAKING) THAN 316 MARINE
GRADE. THIS MEANS 304 CAN REMAIN STRONGER AND ABSORB MORE ENERGY IN AN
ACCIDENT
FOR TYPE 707-02: 1.5MM THICK STEEL TUBE, ONE PIECE FULLY WELDED TO BAR CONSTRUCTION WITH 51MM TUBE DIAMETRE WITH TWO AERIAL MOUNTS. - C : BAR CONSTRUCTED OF 3MM THICK STEEL ,THREE PIECES FULLY WELDED TOGETHER WITH SATURN BLACK POWDER COAT FINISHED STANDARD.
- D : INTEGRATED WINCH MOUNTS FOR SOME VEHICLE MODELS WHERE WINCH MOUNTS DIRECTLY TO THE BULL BAR.(MOST POST 2005 VEHICLES USE A SEPARATE WINCH /BAR BRAKET ATTACHED DIRECTLY TO THE CHASSIS).
- E : 4.5MM THICK INTERNAL BAR MOUNTING FLANGES WITH 3.5MM WING BRACING PLATES.
- F : DURABLE POLYURETHANE OVERRIDE RUBBERS.
- G : DESIGNED TO MAXIMIZE APPROACH AND DEPARTURE ANGLES. WITH HIGH CLEARANCE SIDE WINGS AND FRONTAL PAN.
- H : RE-INFORCE HI-LIFT JACK LIFTING POINTS FOR EASY RECOVERY OPERATIONS.
- I : TWO PRE DRILLED LIGHT MOUNTING POINTS ON TOP OF BULLBAR CAN FIT UP TO 28 INCH L.E.D. LIGHT BAR OR 7 INCH L.E.D. ROUND LIGHTS UNDER THE CENTRE LOOP.
- J : STANDARD RECESSED LIGHT INSERTS WITH 140MM DIAMETER HALOGEN FOG LIGHTS (HB4).
- K : 81MM DIAMETER L.E.D PARK & INDICATORS LIGHTS.
MCC NISSAN PATHFINDER R51 (GROOVE BUMPER) FALCON BAR
- High quality made bar
- Airbag and winch compatible bracket
- ADR Approved and destruction tested
- LED Park and indicator light
- Single upright design
- Powder Coated
- Strong welds
- Made in MCC factory
- Dual aerial mounts
- Dual hi-lift jacking points
- Driving lights mounts
- High quality steel components
- Over rider protection
- Front protection bumpers
- Full bumper replacement
***** COMES WITH FOG LIGHTS AND UNDER PROTECTION *****
Please call the store for freight prices we will take your postcode and accurately quote.
Pick up available in Dandenong, we have the full MCC bar range on display in our showroom!
Please call before you purchase so we can guarantee stock. If out of stock order time is 4-8 weeks
We have a fully qualified fitting and service center with qualified mechanics and Auto electricians, Please contact the store for a fitting quote
NOTE: These is a genuine MCC quality product - Don't settle for inferior products on the market
* If you have any queries about any of our products please contact us.
1 Year Manufacturer Warranty!
Go ahead, grab yourself a bargain!
DESIGNED AND TESTED IN AUSTRALIA TO MEET ADR69 STANDARD.
| MCC SPECIFICATIONS | |
| CAR MANUFACTURER | NISSAN |
| MODEL | PATHFINDER R51 (GROOVE BUMPER) |
| SUIT | ST-L, Ti |
| TYPE | FALCON BAR STAINLESS TRIPLE LOOP PLUS SINGLE LOOP |
| TYPE NUMBER | 707-01 |
| YEAR | 07/2005-05/2010 |