Description:
Fitting:
- We have a fully qualified fitting and service center with qualified mechanics and Auto electricians.
- Fitting charges for EFS KITS - $200
KIT CONTENTS:
- 2 X 36-5546 SHOCK
- 2 x 36-5526 SHOCK
- 2 X EFS COIL SPRINGS
- 2 x EFS LEAF SPRINGS
- 1 X EFS BUSH KIT UK719
- 4 X C671 EFS U-BOLTS
EFS Elite Shock Absorbers
The
EFS Elite Shock Absorber Range is developed for the 4wd owner who only
pursues the best for their 4wd. EFS is built with high quality Internal
& external components combined together to give you excellent
performance and longevity. EFS shock absorbers are vehicle & height
specific with valving developed to suit each vehicle. "Not a one shock
suits all approach"
- 51mm - 60mm External Tube - Greater oil capacity to keep the valve at a lower operating temperature
- Low Pressure Nitrogen Gas - Prevent the oil from cavitating (foaming)
- Long Travel Design - Maximises wheel articulation
- 35mm Piston, Twin Tube Construction - Increased control of the spring during rebound and compression cycles
- 16mm Quality Hardened Chromed Piston Rod Longer service life, and greater lateral strength
- 1.5mm Outer & Inner Wall Thickness Greater durability and strength
- Dynamic Motion Control Valve - Adjusts to different road & off road conditions
- Polyurethane and rubber bushes – HI quality elastomer and rubber mounting bushes to suit specific applications
- EFS
shock absorbers are vehicle & height specific with valving codes
developed to suit each vehicle. "Not a one shock suits all approach" .
3 year / 100,000 km warranty
U-Bolts
- Powder
coasted for protection against corrosion & made from quality carbon
steels with rolled threads to increase strength, due to a uniform grain
finish.
- Deep nuts are supplied for safety & strength with
flat washers to provide a smooth contact surface area to reduce plate
friction.
- EFS have a vast variety of U-bolts on offer for most Makes and Models of 4wd's. We also can custom bend U-Bolts to order.
Elite Leaf Springs
"Transform your rigid leaf sprung vehicle into a comfortable off-road performer with the EFS Elite comfort springs range"!!!
EFS Multi-Leaf Springs are made from high quality Japanese grade SUP9 & SUP9A Alloyed Carbon spring steel.
Designed
as a comfort Leaf Spring that incorporates special features , to give
the driver a comfortable ride on road & increased control off road
with increased articulation & clearance. Available in 30mm to 80mm
raised heights with a slight increase in spring rates over the original
equipment.
- Tapered Leaf Ends - To reduce the inter-leaf friction & to improve pressure distribution in the load bearing area.
- Bolt Clip Liners - To reduce noise & friction.
- Inter-Leaf Graphite Coating - For further reduction of friction.
- Shot Peened & Scragged Tested - To reduce stress & ensure longevity.
- Leaf Inserts Pads - For further reduction of friction.
- Bolt Clips & Military Wraps - To prevent leaf spread & provide safety
- Warranty - 3 year / 100,000 Km Warranty
Enforcer Leaf Springs
EFS Multi-Leaf Springs are made from high quality Japanese grade SUP9 & SUP9A Alloyed Carbon spring steel.
Designed as a Heavy Duty load carrying Spring with many load carrying capacity options.
To suit -
- Mining Applications
- Spear/radius cut endsHeavy laden touring vehicles
- GVM upgrades
- Inter-Leaf Graphite Coating - for further reduction of friction.
- Shot Peened & Scragged Tested - to reduce stress & ensure longevity.
- Bolt Clips & Military Wraps - to prevent leaf spread & provide safety
- Warranty - 3 year / 100,000 Km Warranty
Polyurethane Bushes
- EFS
Polyurethane Bushes are made from high quality elastomers which gives
the EFS Polyurethane Bush a high isolating strength & durable
- EFS
poly bushes have an elastomer rating of 80 Duro to give improved
suppleness & grease channels for increased distribution of
lubrication.properties.
Coil Springs
All EFS Coil Springs are:
- Shot
Peened - To stress relieve the outer surface of the Coil, so the Coil
can operate under higher fatigue & repeated load conditions to
ensure longevity.
- Scragged for Quality Control -This is a
process where the Coil is compressed beyond its yield point; this
compression will set-up residual stresses and increase the elastic limit
of the spring.
- Powder Coated - To resist corrosion & to protect the spring steel from minor damage.
EFS
Coil Springs are manufactured under a strict quality control system
with the use of quality Spring steel in accordance with ISO-9002.
This ensures you are purchasing a high quality product that is backed by a 3 year/100,000km warranty.
EFS
Coil Springs are produced in a variety of raised heights, From standard
to 125mm & also a variety of spring rates to suit different
applications - Towing, Load bearing accessories, Increased ride height
& Competition.
| EFS SPECIFICATIONS |
| FRONT |
HD |
| FRONT - P/NUM & LOAD |
NIS101HHDE 120KG |
| LIFT |
50MM |
| REAR |
XHD |
| REAR - P/NUM & LOAD |
NIS15 500KG |
